• 3820 Valley Blvd Unit i
  • Walnut , CA 91789
  • Tel: 909.598.7230


Monday,Wednesday, Friday  10:00AM - 5:00PM 

12:00PM - 5:00PM Tuesday and Thursday 

Closed  Saturday and Sunday 



2nd store:

Architect's Corner : 1324 s. Flower Los Angeles,CA 90015


Proxxon Scroll Saw DS 115/E

Cuts aluminium, wood, PC cards and plastics with standard scroll saw blades. Controllable stroke rate.

The machined worktable of die-cast aluminum has a size of 6 19/64" x 6 19/64" (160 x 160mm) and is equipped with an adjustable longitudinal stop and graduated miter gauge (0 - 90°). The ABS plastic body provides a very practical sliding door on the right side of the housing for the removal of saw dust. The saw is powered by a 110 - 120V motor (85W) for prolonged use, low noise performance and even supported by a quiet and wear-resistant toothed belt drive, running in a ball bearing assembly. The machine offers an electronically controllable stroke rate from approx. 150 - 2,500strokes/min.



  • Cuts soft wood (e.g. bass wood) up to 1 3/16" (30mm)
  • Hard wood up to approx 25/64" (10mm)
  • Plastic (including circuit boards) up to approx 5/32" (4mm) and nonferrous metals up to 5/64" (2mm) with standard scroll saw blades
  • Blade guide is equipped with an integrated blower



Be Advised :
Other accessories sold separately


"Super-Cut" Scroll saw blades

High quality steel for extended use and prolonged cutting capacity.
Standard version without pin.


Hard materials such as steel and PERTINAX.

Standard-toothed blades, No. 5: 36 TPI.  5.1"x1/32"x1/64" (130x0.85x0.4mm) 12 pieces 


Fine-toothed blades, No. 3: 41 TPI. 5.1"x1/32"x1/64" (130x0.75x0.36mm) 12 pieces


Very fine-toothed blades, No. 1: 50 TPI. 5.1"x1/32"x1/64" (130x0.6x 0.3mm) 12 pieces



Hard and soft woods, plastic, Perspex and soft non-ferrous metal.

Coarse-toothed blades, No. 9: 14 TPI. 5.1"x1/16"x1/52" (130x1.50x0.48mm) 12 pieces


Standard-toothed blades, No. 5: 17 TPI. 5.1"x3/64"x1/64" (130x1.20x0.38mm) 12 pieces


Fine-toothed blades, No. 3: 20 TPI. 5.1"x1/32"x1/64" (130x0,77x0.34mm) 12 pieces




Footswitch FS


This attachment frees your hands for easy on/off operation. To be used for all machines with a maximum power consumption of 5/8hp (500W) with two prong plugs. The switch has a housing of glass-fiber-reinforced nylon. The connecting cord is 3ft. 21" (250cm) in length and the output cord is 19.5" (50cm). Ideal for both portable and stationary machines. If you are working with our 12V hand-held machines, the Footswitch FS is connected to the transformer.