PROXXON HOTWIRE CUTTER THERMOCUT 115/E

Ideal for architects, designers, decorators, artists and teachers. For building architectural models, prototypes as well as classic model railroad, plane and boat items.

The large table with 15 11/32" x 11" (390 x 280mm) ensures smooth and easy movement of the work piece. The printed grid and protractor assist with division and cutting. The solid aluminum overarm has a 13 3/4" (350mm) throat and offers 5 1/2" (140mm) in height. The holder and wire coil (one spool of wire 98ft., 0.008" diameter is included) may be shifted and adjusted along the overarm to enable miter cutting. An LED indicates operation and thus reminds you not to touch the hot wire to prevent burnt fingers (the wire heats to maximum in less than 1 second).

 PX37080

• Printed grid and protractor assist with division and cutting
• Wire heats to maximum in less than 1 second
• One spool of wire 98ft., 0.008" diameter is included

The correct temperature, being material and thickness dependent, is learned from experience. Profiles are ideally cut at lower temperatures and while applying less cutting force.

Other  accessories sold separately

Proxxon THERMOCUT fence TA 300

• Freely selectable setting from 0 - 90° for exact angle cuts with high repeat accuracy
• Integrated T-slot with additional angle stop for particularly intricate cuts

Spare Cutting Wire for Hot Wire Cutter THERMOCUT 115/E. Made of NiCr 8020. ( One spool of wire 98ft., 0.008" diameter is included with THERMOCUT 115/E  )

Spool 

diameter Ø 15/16" (24mm)

thickness 5/16" (8mm)

Bore diameter Ø 1/4" (6.5mm)

Wire size Ø 0.008" x 98ft (Ø 0.2mm x 30m)