Proxxon Hotwire Cutter THERMOCUT 650

For architects, designers, artists, in prototype construction, insulation work and, not least, for classical model building (railroads, airplanes, boats).

For cutting styrofoam, hard foam, polyurethane, PU foam and thermoplastic materials. Switch-mode power supply for 110 - 120V AC connection. The heating element is operated with a safety voltage of max. 40V and 1.2A. Depending on the material the cutting wire temperature is pre-selected using the practical control knob and remains stable while working. Supporting surface with lateral bore for fixing a c-clamp to allow for stationary use.

PX37084

• 1 c-clamp and 1 spool with 30m (98ft) of cutting wire Ø 0.2mm are included
• Telescopic arm for adjustable cutting lengths from 400 - 650mm (15 3/4" - 25 1/2")
• Cutting depth (throat capacity) 200mm (7.9")
• Cutting temperature of wire Ø 0.2mm (0.008") continuously variable from 100 - 350 °C (210 - 660 °F)

Be Advised :
Other accessories sold separately

Spare Cutting Wire for Hot Wire Cutter  made of NiCr 8020. ( One spool of wire 98ft., 0.008" diameter is included with THERMOCUT 650 )

Spool 

diameter Ø 15/16" (24mm)

thickness 5/16" (8mm)

Bore diameter Ø 1/4" (6.5mm)

Wire size Ø 0.008" x 98ft (Ø 0.2mm x 30m)