• 3820 Valley Blvd Unit i
  • Walnut , CA 91789
  • Tel: 909.598.7230


Monday, Wednesday, Friday  10:00AM - 5:00PM 

12:00PM - 5:00PM Tuesday and Thursday 

Closed  Saturday and Sunday 



2nd store:

Architect's Corner : 1324 s. Flower Los Angeles,CA 90015


Proxxon 3 Piece Center Drill Set (2, 2.5 And 3.15 mm)

For face turning, longitudinal turning, boring, taper turning, slicing and drilling. 

With quiet special DC motor, 2-stage belt drive and additional electronic speed (spindle speeds up to 5,000rpm) control for high torque at low speeds for larger work pieces and even for the smallest pieces. Main switch with emergency stop function and restart protection. Precision bearing mounted main spindle with continuous 8.5mm (21/64") bore. Complete with 3-jaw chuck and live center. Center distance 150mm (4"). Swing 55mm (2.2"). Height over cross slide 33mm (1.3").



  • Machine bed with dovetail guides of continuousaluminium casting
  • Handwheels with zero adjustable scale ring (1 division = 0.05mm (0.002"), 1 revolution = 1mm (1/32")
  • Chuck fit for standard ER 11 type collets.
  • Three-jaw chuck, self-centering (inside jaws 1 - 20mm (1/32" - 4/5"), outside jaws 20 - 50mm (4/5" - 2")
  • Die-cast aluminum spindle headstock
  • 110 - 120V AC. 50/60Hz


To be shifted manually on the bed and clamped with lever. Rotating tool post for turning steels 6 x 6mm (15/64" x 15/64"). Processing via top slide (60mm (2.35"), travel distance Z) and cross slide (40mm / 1.57"), travel distance X). The angle adjustment of the upper carriage makes it possible to turn tapers up to +/- 45°.



Be Advised :
Other extra accessories and Chip collection tray not included


Self-centering 3-jaw chuck

Identical to chuck of lathe PD 250/E. High quality clamping fixture as per DIN 8386, Class 1 (concentricity accuracy 0.04mm). Capacity through reversing jaws from 2 - 75mm. Suitable for PD 250/E and the dividing attachment




Radius Cutting Attachment

Mounted on the cross slide in place of the tool holder. For producing convex and concave shapes, for turning radii or 3/4 spheres up to max. 32mm. Height adjustable tool holder (boring tool tip adjustable from 30 through 45mm above cross slide) for use with FD 150/E, PD 250/E, PD and older PROXXON lathes. Dimensions: base plate 67 x 50mm, height 55mm. Complete with finishing cutter 8 x 8 x 80mm. In wooden box with sliding lid.



Drill chuck. Capacity 0.5 - 6.5mm (1/64" - 1/4")

Industrial quality with high concentricity (allowed up to 10,000rpm). Complete with arbour B 10 x MK 0/short. For the tailstock of the FD 150/E.



Multiple range standard ER 11 type collets

Offering high concentricity. May be reduced up to 0.5mm below their nominal diameter (intermediate sizes not required). D = 11.5mm, L = 18mm. One each of 2. - 2.5 - 3 - 4 - 5 - 6 and 7mm are included. With clamping nut M 16 x 1. Suitable for the main spindle of the FD 150/E. Supplied in a wooden box.



Chip collecting tray with splash guard for the FD 150/E

Of 1.5mm (1/16") thick sheet steel, powder-coated. Bevelled edges at the front and back enable easy cleaning. Pre-drilled mounting holes for the secure stability of the FD 150/E. L 400 x W 165 x H 140mm (L 15 3/4" x W 6.5" x H 5.5"). The lathe depicted here is not included in the scope of delivery.



4-jaw-chuck, self-centering for FD 150/E

Used to clamp cylindrical, square, or octagonal work pieces. High accuracy. Clamping range with reversible jaws from 1 - 20mm (inside) and 20 - 50mm (outside). Ø 50mm.



6-piece turning tool set. Made of high-quality cobalt HSS steel. Ground.

One each boring, roughing out, parting, finishing, right and left cutter. Size 6 x 6 x 65mm (15/64" x 15/64" x 2 1/2". For FD 150/E, supplied in wooden box.